FULLY INSURED
✓ BACKGROUND-CHECKED
DRUG-SCREENED
REGISTERED RV TECHNICIAN
RV WATER HEATER & FURNACE SERVICE
RV Water Heater or Furnace Problems? We Find the Real Cause.
Professional mobile RV water heater and furnace diagnostics and repair — including ignition problems, heating concerns, controls, safety devices and system-performance issues.
RV water heater diagnostics & repair
RV furnace diagnostics & heating troubleshooting
Mobile service throughout Southwest Florida
NO HOT WATER
The water heater may fail to produce properly heated water because of ignition, electrical, heating, control, or safety-related conditions.
FURNACE RUNS BUT DOESN’T HEAT
A furnace may operate without producing adequate heat because of burner, airflow, propane, control, or heat-exchanger-related conditions.
Common RV Water Heater & Furnace Problems
RV water heaters and furnaces can develop issues that affect hot water, heating performance, or safe operation. These cards highlight some of the most common problems RV owners notice before calling for service.
WATER HEATER WON’T IGNITE
Propane supply, ignition controls, electrical signals, safety devices, or burner conditions may prevent proper ignition.
FURNACE WON’T IGNITE
Ignition components, propane supply, electrical controls, airflow safety devices, or burner conditions may prevent the furnace from starting properly.
WATER TEMPERATURE ISSUES
Water that is too hot, not hot enough, or inconsistent may indicate thermostat, high-limit, heating-element, flow, or control-related problems.
FURNACE STARTS THEN SHUTS DOWN
Airflow restrictions, sail-switch operation, limit controls, overheating, flame-sensing, or other safety conditions may cause repeated shutdowns or short cycling.
RV Water Heater & Furnace Problems We Diagnose
RV water heaters and furnaces rely on electrical controls, airflow, ignition systems, propane operation and safety devices. Similar symptoms can have different causes, so proper diagnosis is important before parts are replaced.
NO HOT WATER
No hot water, inconsistent temperatures, or water that does not reach the expected temperature.
IGNITION PROBLEMS
Failure to ignite, repeated ignition attempts, flame loss, or intermittent operation.
HEATING & AIRFLOW ISSUES
Weak airflow, insufficient heat, unusual cycling, or uneven heating.
CONTROLS & SAFETY DEVICES
Controls, sensors, switches, circuit boards, and safety devices affecting proper system operation.
Diagnostics First. Parts Second.
We use a systematic diagnostic approach before recommending repairs.
1. Listen
Understand the symptoms, when the problem occurs, which operating mode is affected and how the appliance has been behaving.
2. Test
Evaluate relevant power, control signals, airflow, ignition and operating conditions.
3. Identify
Use actual system behavior and test results to determine the most likely cause.
4. Recommend
Explain the findings and recommend the appropriate repair, service or next step.
RV WATER HEATER COMPONENTS
Control Board
The brain of the unit, managing ignition timing and checking safety parameters.
Pressure & Temp Relief Valve
A critical safety valve that releases pressure if the tank overheats.
RV Water Heater & Furnace Primary Components
SAFETY FIRST: If you detect propane odor, soot buildup, or experience repeated ignition failures, shut off the appliance immediately and contact a professional technician for inspection.
RV water heaters and furnaces are complex appliances that rely on precise electrical controls, gas valves, and safety devices to operate. Understanding these primary components is essential for maintaining safe and functional heating systems.
Ignition System
Produces the spark required to ignite the propane burner safely.
Electric Heating Element
Provides water heating when the RV is connected to shore power.
Burner Assembly
The component where propane and air mix to create the heating flame.
Gas Valve / Solenoid
Electronically opens to allow propane flow to the burner during ignition.
Thermostat / ECO Controls
Regulates water temperature and provides high-limit safety cutoffs.
Anode Rod
A sacrificial rod that prevents tank corrosion in steel-tank models.
RV FURNACE COMPONENTS
Control Board
Coordinates the startup sequence, monitoring airflow and flame quality.
Ignition / Electrode
Creates the spark to ignite the main burner and detects the flame presence.
Blower Motor & Wheel
Moves air across the heat exchanger and through the burner for combustion.
Gas Valve
Safely delivers propane to the burner when signaled by the control board.
Sail Switch
A safety sensor that detects adequate airflow before allowing ignition.
Burner Assembly
The internal chamber where combustion occurs safely to generate heat.
Limit Switch
Protects the unit from overheating by cutting power if safety thresholds are exceeded.
Heat Exchanger
Transfers heat from combustion gases to the air circulated throughout your RV.
We work with most major extended warranty providers when applicable. If your repair is covered, we'll help you through the process.
EXTENDED WARRANTY, WE CAN HELP
Less out of pocket. More peace of mind.
No Hot Water or No Heat in Your RV?
Let RV Prime Care diagnose the problem and determine the right place to start.
Prefer to talk? Call (239) 202-0711